• RCCSE中国核心学术期刊
  • CA、AJ、JST、CSA、IC、EBSCO收录期刊
  • 中国高质量科技期刊金属材料(金属学与金属工艺)领域分级目录期刊

连铸管坯裂纹在加热穿孔过程中的变化

张才安, 刘志怀, 马华宣, 刘仁明

张才安, 刘志怀, 马华宣, 刘仁明. 连铸管坯裂纹在加热穿孔过程中的变化[J]. 钢管, 1994, 23(6): 30-33.
引用本文: 张才安, 刘志怀, 马华宣, 刘仁明. 连铸管坯裂纹在加热穿孔过程中的变化[J]. 钢管, 1994, 23(6): 30-33.
Zhang Caian, Liu Zhihuai, Ma Huaxuan, Liu Renming. DEVELOPMENT OF CC BLOOM SURFACE CRACKS DURING HEATING/PIERCING[J]. STEEL PIPE, 1994, 23(6): 30-33.
Citation: Zhang Caian, Liu Zhihuai, Ma Huaxuan, Liu Renming. DEVELOPMENT OF CC BLOOM SURFACE CRACKS DURING HEATING/PIERCING[J]. STEEL PIPE, 1994, 23(6): 30-33.

连铸管坯裂纹在加热穿孔过程中的变化

DEVELOPMENT OF CC BLOOM SURFACE CRACKS DURING HEATING/PIERCING

  • 摘要: 研究了连铸管坯表面不同深度裂纹在加热穿孔过程中的变化。结果表明,在连铸管坯内部质量良好时,剥皮能显著改善穿孔毛管表面质量;加热穿孔可以消除或减少管坯表面的微裂纹;管坯表面较深的裂纹穿孔后将在毛管表面以外折的形式出现。
    Abstract: A study concerning the development of CC bloom surface cracks with different depths during the course of heating/piercing shows that in case of CC blooms with satisfactory internal quality, peeling process contributes to considerable improvement on the surface quality of the shell, while heating/piercing process removes off or reduce the slight flaws on the work piece, and that deeper cracks on the bloom surface develops into outer surface folds of the shell after piercing.
计量
  • 文章访问数:  10
  • HTML全文浏览量:  0
  • PDF下载量:  5
  • 被引次数: 0
出版历程
  • 收稿日期:  1993-12-23
  • 网络出版日期:  2023-12-15

目录

    /

    返回文章
    返回