Effect of Heat Treatment Process on Microstructure and Properties of Inconel 740H Alloy Seamless Tube

GAO Pei; ZHUANG Jianxin

doi:10.19938/j.steelpipe.1001-2311.2023.6.06.11

STEEL PIPE > 2023 > 52(6): 6-11. > DOI: 10.19938/j.steelpipe.1001-2311.2023.6.06.11

GAO Pei, ZHUANG Jianxin. Effect of Heat Treatment Process on Microstructure and Properties of Inconel 740H Alloy Seamless Tube[J]. STEEL PIPE, 2023, 52(6): 6-11. DOI: 10.19938/j.steelpipe.1001-2311.2023.6.06.11

Citation:

PDF (11763 KB)

Effect of Heat Treatment Process on Microstructure and Properties of Inconel 740H Alloy Seamless Tube

GAO Pei^1,2,
ZHUANG Jianxin²

1. Jiangsu Yinhuan Precision Steel Tube Co., Ltd., Yixing 214200, China;
2. Material Science and Engineering School, Jiangsu University, Zhenjiang 212013, China

More Information

Received Date: January 02, 2023
Revised Date: June 25, 2023
Available Online: January 18, 2024

Graphical Abstract

Abstract

Abstract

The microstructure and mechanical properties of the Inconel 740H alloy seamless tube for the high-temperature components of 700℃ advanced ultra supercritical units are studied under different heat treatment temperatures and holding times. The results show that the longitudinal average grain size of the Inconel 740H alloy seamless tube continuously grows with the increase of heat treatment temperature and the holding time; the apparent activation energy of grain boundary migration in the alloy seamless tube within 10~60 min is 462.26~537.08 kJ/mol, which increases with the increase of time; the longitudinal average grain size of the seamless tube shows a parabolic relationship with the heat treatment holding time, and with the increase of temperature, the dynamic time index η increases first and then decreases; the tensile strength decreases with the increase of the heat treatment temperature and the holding time, and the effect of the heat treatment temperature on the tensile strength is greater than that of the holding time; the hardness of the seamless tube and the longitudinal average grain size conform to the Hall-Petch relationship.
- seamless steel tube,
- Inconel 740H alloy,
- heat treatment,
- grain size,
- Vickers hardness,
- activation energy

FullText(HTML)

References (26)

References

[1]	王崇斌, 徐雪元, 诸育枫, 等. 主蒸汽温度700℃超超临界锅炉水冷壁选材分析[J]. 热力发电, 2015, 44(7):66-71, 77.
[2]	高佩. 700℃先进超超临界锅炉用Ni-Cr-Co基高温合金无缝管的试制[J]. 钢管, 2022, 51(3):28-31.
[3]	王婷婷, 徐松乾, 赵海平. 700℃超超临界机组用C-HRA-1合金管的研制[C]//第十届中国钢铁年会暨第六届宝钢学术年会论文集III. 2015.
[4]	李莎, 曾莉, 李阳, 等. 700℃超超临界锅炉用GH4700镍基合金的热加工性能[J]. 金属热处理, 2013, 38(11):80-83.
[5]	赵海平, 徐松乾. 热交换器用C-HRA-1合金的热加工特性研究[J]. 上海金属, 2015, 37(3):1-6.
[6]	王珏, 董建新, 张麦仓, 等. 700℃超超临界锅炉材料GH4700合金热压缩行为[J]. 北京科技大学学报, 2013, 35(11):1492-1499.
[7]	徐松乾, 王婷婷. 700℃先进超超临界机组过/再热器材料C-HRA-1合金组织稳定性研究[J]. 热力发电, 2016, 45(6):63-69.
[8]	GUO Yan, LI Taijiang, WANG Caixia, et al. Microstructure and phase precipitate behavior of Inconel 740H during aging[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(6):1598-1606.
[9]	COWEN Christopher J, DANIELSON Paul E, JABLONSKI Paul D. The microstructural evolution of inconel alloy 740 during solution treatment, aging, and exposure at 760℃[J]. Journal of Materials Engineering and Performance, 2011, 20(6):1078-1083.
[10]	党莹樱, 赵新宝, 尹宏飞, 等. Inconel 740H合金750℃长期时效后的组织稳定性[J]. 材料工程, 2016, 44(9):58-62.
[11]	赵双群, 张麦仓, 董建新, 等. 新型高温合金700℃时效组织及力学性能[J]. 稀有金属材料与工程, 2003, 32(12):991-994.
[12]	侯世香, 吴正发, 袁晓娜, 等. Inconel 740H合金在模拟煤灰/烟气中的抗腐蚀性研究[J]. 腐蚀科学与防护技术, 2016, 28(3):247-252.
[13]	江涌, 赵双群, 李维银. 改进型INCONEL740镍基合金在模拟煤灰和烟气环境中的腐蚀行为[J]. 机械工程材料, 2008, 32(12):29-32, 43.
[14]	赵双群, 谢锡善, 董建新. Inconel 740合金在空气和含有水蒸气的空气中的氧化研究[J]. 动力工程学报, 2011, 31(10):797-802.
[15]	鲁金涛, 杨珍, 徐松乾, 等. Inconel 740H合金在纯水蒸气环境中的高温氧化行为[J]. 机械工程材料, 2015, 39(10):37-41.
[16]	XIAO Deming, JING Hongyang, XU Lianyong, et al. Microstructure and damage evolution of Inconel 740H welded joint during creep process at 750℃[J]. Journal of Materials Engineering and Performance, 2021, 30(9):4562-4571.
[17]	叶建水, 董建新, 张麦仓, 等. 700℃超超临界电站锅炉用高温合金617B和740H管道氩弧焊接头微观组织特征[J]. 稀有金属材料与工程, 2015, 44(9):2189-2195.
[18]	陈亮, 卢征然. C-HRA-1镍基合金的焊接工艺性能研究[J]. 锅炉技术, 2014, 45(5):68-71.
[19]	李阳, 李莎, 王岩. 固溶处理对GH4700镍基合金管组织及力学性能的影响[J]. 特殊钢, 2013, 34(3):64-66.
[20]	郑子杰, 李强, 亓安芳. C-HRA-1材料不同程度变形后的热处理工艺研究[J]. 锅炉技术, 2014, 45(5):72-76.
[21]	江河, 董建新, 张麦仓, 等. 700℃超超临界锅炉过热器管材Inconel 740H合金冷变形行为研究[J]. 稀有金属材料与工程, 2015, 44(1):126-132.
[22]	余永宁. 金属学原理[M]. 北京:冶金工业出版社, 2020.
[23]	高佩, 程晓农, 罗锐. 热处理对N06230合金无缝管组织及抗拉强度的影响[J]. 钢铁, 2019, 54(12):89-95.
[24]	高佩. 热处理对15-15Ti不锈钢包壳管组织及拉伸性能的影响[J]. 钢管, 2022, 51(1):13-17.
[25]	陈正宗, 刘正东, 包汉生, 等. C-HRA-3耐热合金奥氏体晶粒长大动力学[J]. 钢铁, 2017, 52(7):64-67, 83.
[26]	毛卫民, 赵新兵. 金属的再结晶与晶粒长大[M]. 北京:冶金工业出版社, 1994.

Cited By

Get Citation

PDF

XML

Article views (44) PDF downloads (33)

Turn off MathJax

Article Contents

Abstract

References

Effect of Heat Treatment Process on Microstructure and Properties of Inconel 740H Alloy Seamless Tube

Abstract

References

Catalog

Export File

Citation

Format

Content